The J.E.ME Pia™ Peeling+ device uses ultrasonic vibration modes that cleanse the pores and flush out excess residue
Removes excess sebum, dirt, oil blackheads and dead skin
10X more effective penetration into the skin
Blue LED stabilizes and protects the skin
Convenient & portable
Net Weight : 240 g
Step 1. Rinse your face with lukewarm water and remove makeup. Apply facial water mist or toner to keep face moist.
Step 2. Turn on the device by holding down the power button (The LED light in the center indicates the 3 micro current modes; the top and middle lights are for low and high peeling modes. The bottom light is for toning mode.)
Step 3. Gently press the spatula against the skin and move it in a slow outward and inward direction.
Step 4. Press lightly around all areas of the face for 2-3 minutes until finished. Turn off the device and wash the face thoroughly until clean.
Step 1. Wash your face with lukewarm water and remove makeup. Once skin is clean and dry, apply lotion or moisturizer.
Step 2. Hold down the power button to turn on the device. Then push the power button two more times to activate the ion massaging mode (The massaging mode is the bottom LED light).
Step 3. Press the backside of the spatula in an outward motion to massage and exfoliate the skin.
Step 4. Continue lightly massaging all areas of the face for 2-3 minutes until lotion or moisturizer has completely been absorbed.