Nurture clean skin with this amazing device. Use the power of vibrations to enhance your skin care routine. The device vibrates at 29,000 Hz to wiggle impurities out of your skin. With this state of the art technology, your skin looks and feels cleaner than ever.
Exfoliate without chemicals or sensitivity using the ZAQ UltraScrub. Reveal fresh and clear skin with the Ultrasonic Scrub Device.
This product is ideal to use for
- Clogged pores
- Excess oil
- Dull skin tone
- Polluted skin
- Dry, flaky skin
- Uneven texture
Achieve the skin of your dreams using advanced technology! It addresses common skin concerns with its blood flow enhancing vibrations.
Customizable Skin Care
Get the skin you crave using the three exfoliation modes. Adjust the pressure, regime, and power to your personal preferences. This adds customizability, because ZAQ knows that every woman is unique.
Easy to Clean and Maintain
The ZAQ’s Ultrasonic Scrub Device cleans with soap, water, and oil. There’s no brushes or discs to clean.
To get started using it, simply wet your face and apply a cleanser. Be sure to remove all make up prior to powering on. Tilt the UltraSonic at a 45 degree angle on the parts of your face you want to clean. When you’re done using it, clean the head of the device and charge it for its next use.
Cleaning Mode: Cleanse the skin for clear pores
- Remove protection cap, and power on using the button. Hold for two seconds to enter default cleaning mode, which is indicated with a blue light.
- The positive Ion (+) powers on by holding both sides of the Ion Conductor with your hand.
- Wet face with clean water, and apply your favorite toner or cleanser. Use the sonic head according to the directions in the user manual.
Moisture Mode: Help the skin hold on to its natural moisture
- Remove protection cap, and push Power Button. Hold for two seconds and turn on device.
- When it’s powered on, click the button to enter Moisture Mode, which is indicated with the blue light of the moisture button.
- The negative ion (-) is powered on by holding both sides of the Ion Conductor with your hand.
- Wet face with clean water and apply serum to the face one area at a time. Use the sonic plate according to directions shown in user manual.
Lifting Mode: Lifts facial muscles by stimulating cells with high vibrations
- Remove protection cap and turn device on by pressing the power on button for two seconds.
- Click the power button twice to enter the Lifting Mode
- Apply essence or serum, and use the sonic plate according to directions
Heating Mode: Improve absorption of skin serum. Penetrate tired muscles, soothe and relax the face.
- Remove protection cap and press the power button on for two seconds.
- Start the Heating Mode by clicking the power button three times. The first level is about 39 °C, also the blue light of the heating will be on. Press the power button again to enter the second level about 42 °C.
- Choose the preferred heating level and move head according to user manual
Tips for choosing Heat level. (Don't Use the 2nd level (42 °C) around the eye area.
- 39 °C Heating Mode: This move helps open pores (like a warm steam towel) for cleansing deeply and promoting the absorption of the toner or cream, which improves the smoothness of the skin.
- 42 °C Massage Mode: This mode is suitable for lymphatic drainage massage behind the ear and neck. Deep diathermy helps open lymphatic channels, relax micro-vessels and meridians, promote blood and lymph flow, eliminate heavy metals and toxins, improve blood circulation and promote skin cell renewal. Enjoy an overall refreshed and rejuvenated look.